Harris bi pod spiked feet: These are for bench rest model and spring retractable model
We are proud to offer this awesome kit from GT Machining made exclusively for Rock Lake Rifle Range. Are you tired of your rubber feet not sticking to anything? Our kit is different from anything else for the fact that you add an adapter to the main bi pod and everything else screws on, extensions, spikes, or put your rubber feet back on with the reversed adapter!
The spike is the difference, what makes ours the best is it has an aluminum body with a steel replaceable insert, and the main body has been anodized black, the insert can be sharpened, we sell extra ones also so if they wear out you can feel safe knowing there are replacements available, we offer the most complete kits! These also work will champion and Caldwell and all other copies of Harris. Note; there legs are a few thousands smaller so it is not as tight of fit.
Complete kit=Threaded adapter that pins to bi pod leg, 2 inch extension, extra roll pins, spiked feet and adapter that goes into original feet and allows to be simply screwed back on. The main kit setup with spikes adds 4 inches of height. See illustration below.
Note: For spring retractable you will need a paper clip and small punch and hammer (you provide)
Step#1 Take a punch and drive out original roll pin set aside, this will go into new rubber foot adapter, pull off rubber foot, slide threaded adapter on
Step# 2a (Bench rest model= slide on and re-install new shorter roll pin=done)
Spring retractable= you will take paper clip and make a small hook on one end, use roll pin or pliers. (see picture) insert inside bi pod leg and hook spring, slip on new threaded adapter (it is hollow inside) install roll pin as you are holding spring, make sure roll pin goes through spring.
Step #3 Insert original roll pin in adapter for rubber foot
You tube video from the 6.5 guys on the spiked feet.
This screen shows you the details for the selected product.
Click the "Add to Cart" button to add this product to your shopping cart. You can enter a quantity larger then 1 to add multiples of this product to your shopping cart.
If the product is full you will see a "Wait List" button. Click this button if you would like to be notified if/when capacity is added. If capacity is increased we will email you. Upon receipt of the increased capacity notification, registration will be on a first-come, first-served basis.
If the product is not ready for purchase you will see a "Notify Me" button. You can click this button if you would like to be notified when this product is ready for purchase.
Some products can only be purchased through our partner. In this case you will see an "External Register" button. Click this button to purchase through our partner's website.